PAC Audio RP5-GM32 RadioPRO Radio Replacement Interface for Select GM Vehicles

An all-in-one radio replacement and SWC interface, the innovative RadioPRO5 comes pre-loaded with OnStar retention, amplifier retention, SWC software, navigation-based output signals, and other features that save time and money during installation.

• Retains steering wheel controls (pre-programmed)
• Retains OnStar® when the factory radio is replaced
• Retains factory Bluetooth (2009+ model vehicles)
• Retains rear seat audio controls
• Retains all warning chimes (chime module included)
• Retains back-up sensors/park assist
• Retains factory Bose audio systems
• Retains factory premium Bose audio (Y91 digital. does not support fading)
• Retains factory reverse camera
• Dual-zone function
• Chime volume adjustment (factory buttons)
• Rear seat audio and video (GMRVD2) required
• OnStar volume adjust from steering wheel controls
• OnStar volume adjustment
• Retained accessory power output (RAP)
• Reverse wire output
• VSS (Vehicle Speed Sense) output
• Illumination output
• Parking brake output
• Includes antenna adapter
• Retains lane departure warning system
• Retains OnStar Turn-by-Turn voice prompts

Compatibility Notes:

• Does not retain factory satellite radio
• For use in the following vehicles:
  • All 2012-2013 GM trucks and SUVs equipped with factory navigation radios
  • 2012+ 2500 & 3500 trucks equipped with factory navigation radios
• 2012-2013 GM trucks & SUVs equipped with factory non-navigation radios must use the RP5-GM31
• 2012+ 2500 & 3500 trucks equipped with factory non-navigation radios must use the RP5-GM31
• 2014+ Silverado & Sierra 1500 series trucks must use the RP5-GM51
• In Premium Amplified Systems there will be no fading capability of the aftermarket stereo
• Does not retain factory XM tuner. This is built into the factory radio and is removed when the radio is removed.
• Sony Bluetooth SWC commands are only supported with revision 1.6.6.14 or higher

Vehicle Compatibility Chart: