Synergy Mobile Audio PAF-658 6.5" Midrange Driver
Synergy Mobile Audio is proud to introduce our first “Made in USA” 6.5” pro audio style mid driver. This driver is manufactured utilizing domestically sourced ferrite and steel for the motor and basket then machined and pressed for production. The cone, surround, spider, and tinsel leads are all manufactured in the heartland of the Midwestern USA.
The USA made 1.5” copper voice is wound on a high temp, lightweight Kapton voice coil former. We utilize a 5” diameter poly cotton cupped spider assembly. The water resistant paper cone is attached to a durable treated multi roll cloth surround.
They have added a solid machined aluminum phase plug to aid in high frequency response.
With a nominal impedance of 8 ohms, this driver offers installation flexibility when installing multiple drivers. You can wire up as many drivers as needed to match the output of your amplifier’s recommended load capability. Overall this driver is solid performer with only 2.25” mounting depth, 200 watts, 97db sensitivity and with a useable frequency response of 98 Hz-6000 Hz. This driver is at home as either a dedicated midrange or mid bass.
SOLD INDIVIDUALLY
- Diameter - 6.5in
- Diameter - 16.5cm
- Z - 6.5ohm
- Fs = 98.25Hz
- Qts = 0.477
- Vas = 0.692 cubic feet
- Vas = 19.59 liters
- Xmax = 0.59mm
- Pe = 200 watts
- SPL= 97.42db
- Voice Coil Diameter - 1.5"
- Mounting Depth - 2.25"
- Sd = 165.10^2m
- BL = 8.84
- Cms = 0.30
- Mms = 8.62
- Qms = 5.628
- Qes = 0.521
- Revc = 7.6 ohms
- Frequency response - 98-6khz
- Magnet Assembly Weight - 58oz
We are an authorized dealer for Synergy Mobile Audio products.
